17
Gas Component Connection Checks
Pilot
Housing
Pilot
Housing
Burner
Do not block
opening
CORRECT
INCORRECT
If the burner will not light or stay lit, please perform the following checks.
1.)
Make sure the electrode wire is correctly connected.
Both electrode wires must be fully inserted into the igniter box.
2.)
Make sure that the pilot housing is unobstructed.
Clear any debris on top of the pilot housing and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
Burner
Содержание Ojai 12544LP
Страница 9: ...9 Assembly Instructions 3 Repeat steps 1 and 2 to secure the remaining 3 glass panels...
Страница 10: ...10 Assembly Instructions 4 Place the Glass Topper on top of the glass panels...
Страница 30: ...10 Instructions D assemblage 3 R p tez les tapes 1 et 2 pour fixer les 3 panneaux de verre restants...
Страница 31: ...11 Instructions D assemblage 4 Placez le dessus de verre sur le dessus des panneaux de verre...
