Real Flame Captiva Island 2 sided Скачать руководство пользователя страница 21

Страница: 21 / 24

REMOTE CONTROL OPERATING GUIDE

(continued)

Manual mode

Manual mode does not require that the time and day of the week are set.
Press the

button to increase or decrease the temperature desired.

Automatic mode

The automatic mode allows the temperature to be regulated according to a programmed level and

time.

Manually overriding the set program

At any time, the temperature may be adjusted up or down. However, whenever the thermostat

changes to a new time period, the temperature will be set automatically according to that period’s

setting.

Programming

Each day of the week can be programmed individually for 4 periods P1, P2, P3 and P4, making a

total of 28 programmed periods.
Alternatively, a weekday program can be set, so the same program is used for Monday-Friday.

Similarly, a weekend program can be set for Saturday-Sunday. The entire week can also have the

same program.
Alternatively, a weekday or weekend program can be set with individual programs for the

remaining days.
The suggested period settings for each day/s are:
•

Period 1 - morning

•

Period 2 - daytime

•

Period 3 - evening

•

Period 4 - night-time

To begin programming

With the thermostat off, press and hold the ‘P’ button for 2 seconds or longer to initiate

programming. The LCD will display , and the time at which the thermostat is currently

set.

will flash.

Period 1 can now be set.
•

Setting the day of the week

You must choose which day/s of the week you wish to program.
Press and release the

button to change the day of the week to the following or

previous day. Press and hold the

button for 2 seconds or longer to increase or

decrease the day of the week by 1 day every 0.5 seconds.
The order that you can scroll through the days is as follows:
MO

→

MO TU WE TH FR

→

SU SA

→

MO TU WE TH

FR SA SU
To accept the selected day/s of the week press ‘OK’.

Содержание Captiva Island 2 sided

























Результаты поиска

Содержание Captiva Island 2 sided

Отзывы:

Похожие инструкции для Captiva Island 2 sided

Бренды по названию

Популярные бренды

Real Flame Captiva Island 2 sided, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Captiva Island 2 sided

Отзывы:

Похожие инструкции для Captiva Island 2 sided

Бренды по названию

Популярные бренды