
Figure 2
Step Two
Figure 2
Insert the end of the Lift Assembly (7) into the hole
at the top of Lift Assembly Leg (8).
Using two bolts attach Lift Assembly to the left side
of the grate through two hole in the leg on left side.
5
1
4
7
Figure 3
Figure 4
Step Three
Figure 3
Raise the handle on the lift assembly to the open
position.
Place the Front Log (4) and the Rear Log (5) as
shown in
figure 3
.
Step Four
Figure 4
Attach the Left Log (1) to the metal finger stamped
“1” with two bolts as shown in figure 4.
NOTE: use caution not to over tighten bolts.
8