Technical support: www.real-el.com
5
ENG
User’s manual
S-2020
* You might have to enter “0000” code to connect some models via Bluetooth.
** If an item has been already registered in the device list of sources, then the second search mode activation is
not needed. Choose only the item name and the “connect” command on the source.
5. OPERATION MODES
Bluetooth mode
•
Bluetooth mode requires connection of MMS with a signal source. For this purpose select the
Bluetooth mode using MODE button
c
on the front panel of the subwoofer or MODE button
b
on the remote control. After 2-3 seconds the speaker system starts the search mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (phone,
notebook, smartphone, etc.). “S-2020” device will be displayed on the screen which should be
connected to*.
•
After a successful connection, the loudspeaker will sound a signal.
**.
FM mode
•
Turn the FM mode with the MODE button repeatedly until the frequency of the radio station
appears on the display.
•
In the playback mode, brie
fl
y press the " " button to automatically search FM stations and save
them automatically. Press the " " or " " buttons to switch between stations.
Playback mode
•
Insert USB
fl
ash drive into the corresponding slot, the audio track will be played automatically. In
the playback mode, brie
fl
y press the " " or " " button to select the desired tracks.
•
Press the " " button to play or pause.
KARAOKE Mode
Karaoke is always active with any audio source (AUX, Bluetooth, FM etc.)
To start using Karaoke mode need to connect microphones and set up volume and echo level
LINE IN/AUX mode
•
For compatible music devices, use an audio cable with the 3.5 mm mini jack or 2RCA. Connect the
cable to the audio output of any audio source with a 3.5 mm mini jack or 2RCA. Then press the
"MODE" button to switch to mode.
Note: You must turn off the power button "OFF / ON." If the system is not used for a long time.
