manualshive.com logo in svg

ReadyNet AC1100MSF, Руководство пользователя, Страница: 3 / 9

Поделиться
Скачать
ReadyNet AC1100MSF Скачать руководство пользователя страница 3

Installation

This chapter describes how to install and connect the device to the electrical power and data
network as well as how to apply factory settings.

The following topics are covered:

- Power adapter

- Factory Settings

Power Adapter

1. Connect the Network and Power

Connect the DC plug on the power adapter to the DC port on the device and connect the other

■

end of the power adapter into an electrical power outlet.

Connect the ethernet cable between the Internet port on the device and the network port on a

■

router or switch to access LAN.

IP Address

1. Find out your ReadyNet AC1100MSF IP Address

For ReadyNet AC1100MSF lift the handset and enter ****, choose "1" and then choose "2",

■

the IP address will be recited.

Factory Settings

1. Reset to factory settings

This step is not required for out-of-the-box devices, however, if the device has been already used
then it is a must.

For ReadyNet AC1100MSF press the reset button at the back of your router device for 10

■

seconds, this will wipe out any changes made to your router.

Device will be reset to the factory default settings.

Wait sometime prior for device to reboot.

■

NOTE: 

 Do not unplug or remove power to the device while it is updating firmware and

configurations.

Registering Device

This chapter describes how to identify ReadyNet AC1100MSF device model, requirements that
must be met and how to register the device using manual configuration or auto provisioning.

The following topics are covered:

Содержание AC1100MSF










Отзывы:

Нет отзывов