manualshive.com logo in svg

Readiness Systems AED Sentinel, Руководство по установке, Страница: 3 / 16

Поделиться
Скачать
Readiness Systems AED Sentinel Скачать руководство пользователя страница 3

2

3

AED Sentinel Installation Guide

Thank you for choosing AED Sentinel, a remote AED monitoring system built for every 

AED program. With AED Sentinel, AED program managers can be confident that their 

devices are always ready, ensuring compliance and easing the burdens of program cost 

and management. 

This guide walks you through the easy installation process. A typical installation takes 

no more than 10 minutes. Once installed, AED Sentinel will help ensure your AEDs are 

always ready when you need them.

Table of Contents

Topic                                                                             

Visual Status Indicators and Camera Aiming
Tools You’ll Need
What’s in the Box
Before You Begin
Install the AED Sentinel Monitoring Hardware
   

Drill the antenna hole

   

Install the antenna

   

Install the battery pack

   

Install the communications module

   

Install the cable management clip

   

Place the AED

   

Install the camera

   

Aim the camera

Activate the AED Sentinel Monitoring Unit
Troubleshooting
You’re Done!

Note for Non-Metal and 

Stainless Steel Cabinet 

Owners

Because most AED cabinets 

are metal, AED Sentinel 

hardware is designed out 

of the box to be installed 

magnetically. If you have  

non-metal or stainless steel 

AED cabinets, please contact 

us at support@aedsentinel.

com. Mounting plates are 

available that will allow you to 

affix AED Sentinel monitoring 

hardware to your cabinets.

Note for Recessed and

Semi-Recessed Cabinet 

Owners

If you have recessed or 

semi-recessed AED cabinets, 

please contact us at 

[email protected]. 

We’ll need to learn more 

before providing you with 

installation directions.

Page

4
4
4

5
5
5
5
6
6
7
8
8
9

12
15
15

Содержание AED Sentinel

















Отзывы:

Нет отзывов