background image

10

Limited Warranty:

RE Audio warrants all manufactured electronic products to be free from 
defects in material and workmanship for a period not to exceed ONE YEAR 
from the date of purchase.

IMPORTANT WARRANTY NOTICE

: RE Audio will only warrant and 

service products displaying valid RE Audio serial numbers. 

WARRANTY 

SERVICE WILL ONLY BE PERFORMED WHEN THE UNIT IS ACCOM-
PANIED BY A COPY OF THE ORIGINAL SALES RECEIPT FROM AN 
AUTHORIZED DEALER.

 All product returned to RE Audio for service 

MUST be accompanied by a Return Authorization Number, issued by RE 
Audio in advance of shipment. The Return Authorization Number must be 
clearly and conspicuously displayed on the shipping carton or RE Audio 
will refuse delivery.

For Return Authorization Numbers, first call your RE Audio dealer you purchased 
the products from. The dealer will help you to obtain Return Authorization Num-
bers.
This warranty extends only to the original purchaser and is not transferable. 
Defective equipment must be returned within the warranty period, freight prepaid, 
to the RE Audio Factory or an Authorized RE Audio Warranty Station. 
This warranty covers only detects in materials and workmanship of manufactured 
electronic products(amplifiers). Incidents of misuse, abuse, neglect, or unautho-
rized modification will not be covered within the terms of this warranty.
RE Audio reserves the right to refuse warranty service under such conditions.

RE Audio WILL NOT BE RESPONSIBLE FOR ANY DAMAGES, WHETH-
ER INCIDENTAL OR CONSEQUENTIAL, RELATED TO THE USE OF 
THIS OR ANY OTHER PRODUCT BEARING OR SOLD UNDER THE RE 
Audio BRAND NAME. USE THIS PRODUCT AT YOUR OWN RISK. 
IMPROPER USE OF THIS PRODUCT CAN RESULT IN PROPERTY 
DAMAGE, BODILY HARM, AND OR OTHER DAMAGE. RE Audio 
ASSUMES NO RESPONSIBILITY FOR YOUR HEALTH OR SAFETY.

Содержание BT900.4M













Отзывы: