Amplifier’s control – settings by the computer
All settings introduced by the amplifier’s control panel can be also done by the PC computer. To get the
possibility of the amplifier control by the computer, the program MWL Control must be installed ( it is on the
CD added). MWL Control program is created only for the configurations of MWL-DSP1 and AMWL- DSP1
series.
Licensor is not responsible for any harm of the program operation or for the wrong use of the program.
MWL Control program is on the CD which is given together with the amplifier. To install the program on
the computer, put the CD inside the CD-ROM, than, start it by installation folder and follow the
instructions.
When the installation is done, connect the amplifier with the computer and start the MWL Control
program. Connect the amplifier by the cable from socket no 8 on the front panel to the USB socket in the
computer and than, turn on the power – switch (15). When the program starts, open “Settings” on the
menu and choose “Connection”. After the “ Settings of the device” is shown, click on “Scan” to find the
port, where the amplifier is installed. After scanning the ports, there is a note: “ MWL is found on the port
no …”
7
After closing the windows ( click on “OK” on every window), the amplifier connects with the program
automatically. If the amplifier’s settings are saved with the password, there will be a window to introduce
it – there is no possibility to change any configuration without introducing the password.