IMPEDANCE SWITCH
Set to 8 Ohms
IMPEDANCE SWITCH
Set to 8 Ohms
IMPEDANCE SWITCH
Set to 4 Ohms
Single 8 Ohm speaker
Single 4 Ohm speaker
Two 8 Ohm speakers
Two 4 Ohm
speakers
IMPEDANCE SWITCH
Set to 4 Ohms
891-3410A
DO NOT GROUND EITHER SPEAKER OUTPUT TERMINAL
SIGNAL PRESENT
The green LED glows when audio is present at the input. The indication is not affected by the setting of the mixer level control.
INPUT LEVEL
Adjust level control for the desired output level with the remote control (if used) set to normal operating position.
POWER INDICATOR
Glows dimly when unit is in standby (off)
mode; glows bright when amplifier is on.
POWER BUTTON
Latching pushbutton switches the
amplifier ON or off (STANDBY).
TONE CONTROLS
Adjust BASS and TREBLE as desired.
COMPRESSION INDICATOR
LED flashes when audio compressor is
acting on the amplified audio.
RDL
•
659 6th Street
•
Prescott, AZ
•
USA 86301
•
Sales: 800-281-2683
•
928-443-9391
•
Tech Support: 800-933-1780
•
928-778-3554
•
RDL Europe Sales & Support: (31) 20-6238-983
•
www.rdlnet.com
Copyright © 2011 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all HD products except power supplies. Other trademarks, if any, are the property of their respective owners.
OPERATION
OUTPUT CONNECTIONS
