background image

EZ-RA6

EZ-CC6

SELECTED MOUNTING ACCESSORIES

TYPICAL PERFORMANCE

Rack Adapter 

for 6 Increments of 1/6 Rack Width

Component Chassis 

for 6 Increments of 1/6 Rack Width

EZ-UCB2

Under-Counter Brackets 

1/6 or 1/3 Rack Width

Use In Place of Filler Panel

Holds Adapters and Cables

Mounts in EZ-CC6 and EZ-RA6

Complete accessory listing available at: rdlez.com

Copyright © 2009 Radio Design Labs, Inc.  RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc.  Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.

Input: VGA - QXGA RGBHV or RGB with combined sync

Outputs (4): LOCAL MONITOR (1, Buffered, ID bit pass-thru to INPUT 1), OUTPUTS (3, with GAIN and EQ trim)

Gain: Unity (LOCAL MONITOR output), Unity to +6 dB (Monitor outputs)

Equalization (peaking): None (LOCAL MONITOR output), Adjustable 0 to +8 dB at 100 MHz (Monitor outputs)

Video bandwidth: > 400 MHz

Video impedance: 75 

Ω

 (Input and output)

Sync (HV) input: 500 

Ω

 TTL or 75 

Ω

 Video (Switch-selectable), 0.7 V to 5 V p-p

Sync (HV) output: 5V TTL

Sync (HV) Propogation delay: < 4 nS typ.

Sync (HV) Rise time: < 4 nS typ.

Sync (combined): Output follows input

Bit Control: Switch-selectable (individual selector per input, pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)

24 Vdc power supply current: 70 mA (idle), 90 mA (max.)

Power supply input voltage: 100 to 240 VAC

Warranty: 3 Years; contact RDL technical support department for assistance

Case dimensions: 5.75” (14.6 cm)W x 5” (12.7 cm)D

Mounting size: 1/3 rack width

891-1595

EZ-DC2

EZ-SMB2

TYPICAL PERFORMANCE

Desktop Chassis 

1/3 Rack Width

EZ-UCB2

Under-Counter Brackets 

1/6 or 1/3 Rack Width

Surface Mount Bezel 

for 1/3 Rack Width Products

EZ-SD2

Storage Drawer 

1/3 Rack Width

Copyright © 2009 Radio Design Labs, Inc.  RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc.  Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.

Отзывы: