EZ-RA6
EZ-CC6
SELECTED MOUNTING ACCESSORIES
TYPICAL PERFORMANCE
Rack Adapter
for 6 Increments of 1/6 Rack Width
Component Chassis
for 6 Increments of 1/6 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
Input: 75
Ω
on BNC jack
Input level: 1 V p-p nominal
Gain: Unity to +6 dB (adjustable)
Bandwidth: > 400 MHz
Coupling: AC
Differential Gain: < 0.1%
Differential Phase: < 0.1 degree
Equalization: Flat to +7 dB @ 50 MHz (adjustable)
Residual Noise: < -90 dB (referenced to 1 V p-p)
Outputs (3): 75
Ω
source-terminated on BNC jacks, 1 V p-p nominal (terminated)
24 Vdc power supply current: 20 mA (idle), 35 mA (max.)
Power supply input voltage: 100 to 240 VAC
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 2.9” (7.4 cm)W x 3” (7.6 cm)D
Mounting size: 1/6 rack width
891-1540
EZ-DC1
EZ-SMB1
Desktop Chassis
1/6 Rack Width
Surface Mount Bezel
for 1/6 Rack Width Products
EZ-SD1
Storage Drawer
1/6 Rack Width
