EZ-RA6
EZ-CC6
SELECTED MOUNTING ACCESSORIES
TYPICAL PERFORMANCE
Rack Adapter
for 6 Increments of 1/6 Rack Width
Component Chassis
for 6 Increments of 1/6 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
Mic inputs (2): 1.2 k
Ω
balanced on XLR jack, mic-level, -11 dBu max.
Line inputs (3): > 10 k
Ω
, -10 dBV nominal on RCA jacks, -10 dBV nominal on RCA jacks or Mini Jack, +20 dBV max.
Level controls (4): Off to 50 dB gain (mic), Off to 12 dB gain (line)
Output: -10 dBV nominal on RCA jacks or Mini jack (stereo), +16 dBV max.
Frequency Response: 80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), 10 Hz to 20 kHz (±0.01 dB, line input)
THD+N: < 0.1% (20 Hz to 20 kHz, -50 dBu mic input), < 0.05% (20 Hz to 20 kHz, line input)
Crosstalk: < -72 dB (1 kHz)
CMRR: > -55 dB (20 to 20 kHz, mic input)
Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
Phantom: 24 V (IEC 1938: 1996-12)
Noise: < -65 dB (below -10 dBV output, -50 dBu mic input), < -75 dB (below -10 dBV output, line input)
24 Vdc power supply current: 50 mA (idle), 80 mA (max.), 100 mA (max. with phantom)
Power supply input voltage: 100 to 240 VAC
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 5.75” (14.6 cm)W x 3” (7.6 cm)D
Mounting size: 1/3 rack width
891-1610
EZ-DC2
EZ-SMB2
TYPICAL PERFORMANCE
Desktop Chassis
1/3 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Surface Mount Bezel
for 1/3 Rack Width Products
EZ-SD2
Storage Drawer
1/3 Rack Width
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
