24 VDC POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
POWER INDICATOR
Glows blue when the
product is connected to
a valid power source.
OUTPUT LEVEL
Adjust the gain controls for the correct
level on the OUTPUT LEVEL meters.
MICROPHONE INPUTS
Connect a microphone to the
LEFT and RIGHT XLR jacks.
Microphones may be either a
dynamic or condenser type.
LINE OUTPUT
Connect to other equipment line input from either
the RCA jacks or from the stereo MINI-jack.
PHANTOM SELECTOR
Set for mic type connected:
Dynamic mic: OFF (out)
Condenser mic: ON (in)
STEREO OUTPUT VU METERS
LEFT and RIGHT LED VU meters monitor the unbalanced
outputs for proper -10 dBV level. With audio present, the
variable intensity green LED should be as bright as possible
with the red LED flashing occasionally. (The red LED
flashes when the output level exceeds -10 dBV.)
AUDIO COMPRESSORS
Compressors control overload and clipping
over a wide dynamic range of input signals,
and are normally enabled. Set the switch to
either enable (button IN) or disable (button
OUT) compression.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock.
Rotate 1/4-turn
counter-clockwise
to unlock.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
