24 VDC POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
POWER INDICATOR
Glows blue when the
product is connected to
a valid power source.
OUTPUT LEVEL
Adjust the gain control for the correct
level on the OUTPUT LEVEL meter.
MICROPHONE INPUT
Connect a microphone to
the XLR jack. Microphone
may be either a dynamic or
condenser type.
LINE OUTPUT
Connect to other equipment line input from either the
RCA jacks or from the stereo MINI-jack.
PHANTOM SELECTOR
Set for mic type connected:
Dynamic mic: OFF (out)
Condenser mic: ON (in)
OUTPUT VU METER
The LED VU meter monitors the unbalanced output for
proper -10 dBV level. With audio present, the variable
intensity green LED should be as bright as possible with the
red LED flashing occasionally. (The red LED flashes when
the output level exceeds -10 dBV.)
AUDIO COMPRESSOR
The compressor controls overload and
clipping over a wide dynamic range of
input signal level, and normally should be
enabled. Set the switch to either enable
(button IN) or disable (button OUT)
compression.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock.
Rotate 1/4-turn
counter-clockwise
to unlock.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
