EZ-RA6
EZ-CC6
SELECTED MOUNTING ACCESSORIES
TYPICAL PERFORMANCE
Rack Adapter
for 6 Increments of 1/6 Rack Width
Component Chassis
for 6 Increments of 1/6 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
Inputs (3): Stereo on dual RCA jacks, stereo mini jack or 1/4” (6.3 mm) TRS, > 10 k
Ω
, -10 dBV nominal, +8.5 dBV max. (RCA and 1/4”), -16 dBV nominal, +2 dBV max. (Mini)
Level control: Off to +2.5 dB gain (RCA and 1/4” inputs, 100
Ω
output load), Off to +9 dB gain (Mini input, 100
Ω
output load)
Outputs (4): Stereo on Mini jacks (rear panel), 60 mW (100
Ω
load)
Frequency Response: 20 Hz to 50 kHz (±1.5 dB)
THD+N: < 0.1% (10 mW output, 100
Ω
load)
Crosstalk: < -75 dB (1 kHz)
Noise: < -95 dB (below 10 mW output, 100
Ω
load, maximum gain)
24 Vdc power supply current: 40 mA (idle), 65 mA (max.)
Power supply input voltage: 100 to 240 VAC
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 5.75” (14.6 cm)W x 3” (7.6 cm)D
Mounting size: 1/3 rack width
891-1520
EZ-DC2
EZ-SMB2
TYPICAL PERFORMANCE
Desktop Chassis
1/3 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Surface Mount Bezel
for 1/3 Rack Width Products
EZ-SD2
Storage Drawer
1/3 Rack Width
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
