EZ-RA6
EZ-CC6
SELECTED MOUNTING ACCESSORIES
TYPICAL PERFORMANCE
Rack Adapter
for 6 Increments of 1/6 Rack Width
Component Chassis
for 6 Increments of 1/6 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
UNBALANCED TO BALANCED SECTION
Input: Stereo on dual RCA jacks, > 10 k
Ω
, -10 dBV nominal, +16 dBV max.
Level control: Off to 12 dB gain above nominal
Output: Stereo on dual XLR jacks, +4 dBu nominal, +26 dBu max.
Frequency Response: 10 Hz to 50 kHz (±0.01 dB)
THD+N: < 0.01%
Metering: Dual-LED VU Meter for Left and Right, calibrated to +4 dBu output
Crosstalk: < 75 dB (1 kHz)
Noise: < -85 dB (below +4 dBu output)
24 Vdc power supply current: 45 mA (idle), 90 mA (max.)
Power supply input voltage: 100 to 240 VAC
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size: 1/3 rack width
BALANCED TO UNBALANCED SECTION
Input: Stereo on dual XLR jacks, +4 dBu nominal, +26 dBu max.
Level control: Off to 12 dB gain above nominal
Output: Stereo on dual RCA jacks, -10 dBV nominal, +17 dBV max.
Frequency Response: 10 Hz to 50 kHz (±0.01 dB)
THD+N: < 0.003%
Crosstalk: < 80 dB (1 kHz)
CMRR: > 50 dB (50 Hz to 120 Hz)
Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
Noise: < -75 dB (below +4 dBu output)
891-1500
EZ-DC2
EZ-SMB2
TYPICAL PERFORMANCE
Desktop Chassis
1/3 Rack Width
EZ-UCB2
Under-Counter Brackets
1/6 or 1/3 Rack Width
Surface Mount Bezel
for 1/3 Rack Width Products
EZ-SD2
Storage Drawer
1/3 Rack Width
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
