RD S12D, Руководство по сборке

Страница: 16 / 18

声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
16
● Tools, accessory (DC power supply, screw driver)
● Proper assembly environment
Note: The case material is a bit soft and may be slightly deformed during transportation. If
there is a gap during the assembly, please straighten it before assemble it.
5.2 Assembly Step
1. Check the accessories:
Check if the accessories of S12D are same as accessory list or accessory picture.
2. Install the female banana sockets and switch:
Please put the female banana sockets and rocker switch on the corresponding position of
back board, the red female banana socket is positive electrode and the black female banana
socket is negative electrode. Screw the fixing screws.
3. Connect cables
Use cables to connect switch and female banana sockets, and tighten with nuts, the wiring is
completed, you can see the final connection below: