RDC6334G Laser cutting system hardware user manual
SHENZHEN RUIDA TECHNOLOGY
9
Figure 2.4-2
Refer to speed setting for parameter setting method.
2.5 Layer Parameter Setting
When system is idle, when there is layer information, click layer parameter list with your finger or mouse
to select a layer. If there are multiple layers, you can press and hold the middle of the list and drag down
with your finger. At this time, the layer list will scroll down correspondingly. Then press”Enter” after
selecting, and the layer setting dialog box will pop up:
Figure 2.5
Please refer to speed setting for parameter modification method. Press “Enter” key after modifying the
