background image

11 

7

 

Disposal  

Here you will find information on the proper disposal of electrical waste.  

1 Separate collection of old appliances  

Electrical and electronic equipment that has become waste is referred to as old equipment. Owners of WEEE must dispose of 
it separately from unsorted municipal waste. In particular, WEEE does not belong in household waste, but in special 
collection and return systems.  

2 Options for the return of WEEE  

Owners of old appliances from private households can return them free of charge to the collection points of the public waste 
management authorities.   

3. data protection  

Old appliances often contain sensitive personal data. In your own interest, please note that each end user is responsible for 
deleting the data on the waste equipment to be disposed of.  

4 Meaning of the symbol "crossed-out dustbin  

 

The symbol of a crossed-out dustbin regularly displayed on electrical and electronic equipment indicates 
that the respective device must be collected separately from unsorted municipal waste at the end of its 
service life. The appliance must not be added to household waste.  

8

 

Disclaimer 

 

Although every care has been taken to ensure the accuracy and completeness of the information contained in this manual, 
no liability can be accepted for errors or omissions. 

RCT Power GmbH reserves the right to change the hardware and software features described herein at any time without 
notice. 

Warranty or liability claims of any kind are excluded by one or more of the following causes: 

 

 

Improper use or installation of the product 

 

Non-compliance with storage and transport conditions 

 

Damage in transit 

 

Operation of the unit outside the specified range 

 

Use of unsuitable tools, measuring equipment or protective equipment 

 

Installing or operating the product in an unsuitable environment 

 

Failure to observe relevant safety regulations at the place of use, during installation and commissioning 

 

Ignoring safety notices and instructions in all documents relevant to the product. 

 

Installing or operating the product under incorrect safety or protective conditions. 

 

By modifying the product or installing software without authorisation 

 

A defect in the product caused by operated or neighbouring equipment outside the permissible limits 

 

Damage due to force majeure 

 

This manual may not be reproduced, transmitted, copied or translated into other languages, in whole or in part, in any form 
or by any means, without the prior written permission of RCT Power GmbH. 

RCT Power GmbH does not accept any guarantee for damage due to faulty or lost data, due to incorrect operation or 
malfunction of the inverter, the software, additional devices or PCs. 

 

 

Содержание Power Inverter 5.0

















Отзывы: