
3-4)
Tap smart Wi-Fi
※
If you connect automatically,
skip to step 3-7.
IPCam
3-5)
Tap smart Wi-Fi
8:30
Add device
Device ID (ex: 404087)
Smart Wi-Fi Setting
Your device is offline. Please check the device’s
network connection
Step 1, Power on the device(IP camera)
Step 2, Connect the device to network:
1. If device with RJ-45 LAN port, connect device
with your router or switch with a net-cable, wait
about 30 seconds, tap “Back” to re-add device
2. If device without RJ-45 LAN port, tap “Smart
Wi-Fi Setting” to add the device
Back
8:30
Add device
Device offline, please choose camera
netwok connection mode.
Device ID (ex: 404087)
Back
If you do not hear a beep at this
stage, you will need to reset the
IP camera.
[See how to reset 5P]
Connection is no possible if there
are too many devices sharing
the same Internet network or if
they are far away from the
wireless router.
Smart Wi-Fi
AP Hotspot
If the manual connection does
not work, you must connect
WiFi signal in your phone,
not 4G or 5G.
3-6)
Enter your Wi-Fi password after
checking Wi-Fi names nearby.
If the password is not set,
enter the space bar in blank and
press the Next button.
Input Wi-Fi password
Next
8:30
WI-FI Setting
Device ID (ex: 404087)
Wi-Fi name
Back
3-7)
The screen you are connecting
to Wi-Fi appears
※
If you do not go to steps 3-8,
skip to step 4-1.
Back
8:30
WI-FI Setting
Configuring Wi-Fi ..., Please wait...
3-8)
You can change your password.
If you do not want to change it,
go to step 3-10
8:30
WI-FI Setting
Device ID (ex: 404087)
Skip
Change Password
WI-FI setting succeed
Back
3-9)
Enter a new password with a
number between 3 and 9 characters.
Special characters are not allowed.
Reinput new admin password
Modify
8:30
Change Admin Password
Input old admin password
Input new admin password
Back
North America Sales & Service www.RcomCo.com
Rcom small animals smart hospital ICU Camera Manual