Digital Incubator
16. How to calibrate Temp.(Humidity)
13. How to Terminate Incubation
14. Incubator Initialization
15. How to Clean after Hatching
12. How to turn off Humidification Function
17. Specification
www.R-com.co.kr
Professional
PX-20RD
professional
How to calibrate : Fill vermiculite to three fourths of the internal tray. Fix temperature or hygrometer at 2 cm above
the bottom of the tray and operate it for one hour before starting its calibration.
This calibration function is to reset the temperature and humidity of the incubator to correct values using
your thermometer and hygrometer. It is better not to calibrate the incubator as normal thermometer and
hygrometer are not reliable than incubator factory setting.
*
Be sure to check CAUTIONS before you calibrate temperature or humidity.
( ALL RESET )
For returning to the factory setting
▶
If you want to return to the initial set values, please follow this sequence.
1) Select All Reset at SET UP mode
2) Press Enter
3) Press OK
▶
Unlock three of locking buttons at the front and back of incubator,
and disassemble the incubator.
Do not clean the product with organic solvents
such as benzene and paint thinner.
Do not inflict an impact to the humidification heating part
ⓐ
.
Or, it will be damaged.
Temp. Accuracy
Working Temperature
Ideal : 22
℃
~ 25
℃
Min. 20
℃
/ Max. 26
℃
Power
Humidity Limits
±
0.5
℃
Temp. limits
20
℃
~ 42
℃
(68
℉
~107.6
℉
)
AC 100V~120V, 50/60Hz / AC 220V~240V, 50/60Hz
40% ~ 95% ( It can be changed according to the conditions )
Humidity Accuracy
±
5%
10~120 Eggs Available at once
Capacity
Net Weight
Size
4.5 Kg
Fuse Standard
250V 2.0A (
Ø
5
×
20mm)
(W)500
×
(L)410
×
(H)160 (mm)
Power Consumption
Average 48W
●
COMPANY
●
TEL
●
FAX
●
: #612 DukAm-Ri, JuChon-Myeon,
: GimHae-City, GyeongNam, KOREA
: 82-55-337-2560 (Direct to sales team)
: 82-55-337-2561-3, 2567 (Office)
: 82-55-337-2568
: [email protected] ( Sales team )
Visit our web site (www.r-com.co.kr) for more information
on our products and other informations.
Update of information : download the necessary information
from resource room in Rcom homepage.
R-com digital reptile incubator is designed for easy and
convenient use.
For the improvement of the functions of the incubator, design,
how to use, etc. can be changed without notice in advance.
▶
If you press MENU button on incubation period,
" System finish Are you sure ? "
messgae will show.
▶
Select YES with UP / DOWN button, and then ENTER button.
▶
Pull out the electric cord from connecting jack,
and also take out the plug from the outlet.
▶
In case of you operate humidification function, there can be moss
on the humidification heating part
ⓐ
. It doesn't effect in function,
and you just need to clean it with soft brush after hatching.
WATER
▶
Disassemble the incubator. The bottom part shall be thoroughly cleaned
with water and dried.The upper parts shall be naturally dried in order to
remove moisture inside of the incubator.
Assemble the parts in the reverse order of disassembly.
CAUTIONS
▶
You can turn off humidification function when you don't fill water with your incubation
or when you need low humidity incubaion under 40%.
▶
Press "QUICK SET" button twice, and ress DOWN button until OFF indicated at humidity setting.
Then, press ENTER button. (OFF will show when the humidity is under 40%.)
Select
the Species
of Reptile
2 Sec.
Temp. Setting
Humid. Setting
Daily Temp. Gap Setting
Screen
on Incubation
Screen
on Incubation
Select
the Species of Reptile
2 times
Once: Temp. Setting
Twice: Humidity Setting
Three times: Daily Temp. Gap setting
UNDER 40%
REFER TO "HOW TO START INCUBATION" FOR MORE INFORMATION.
"All Reset"
℃
℉
℃↔℉
"OFF"
MENU
MENU
QUICK SET
QUICK SET
QUICK SET
ENTER
ENTER
ENTER
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
SET UP
BACK
DOWN
SET UP
BACK
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
System finish
Are you sure?
Automatic Mode
Incubation
Other(Manual) Mode
Incubation
How to change Setting under Incubation
(QUICK SET)
Incubation
Termination
Incubator Initialization
(Factory Setting)
℃
↔
℉
How to change
How to turn off
Humidification Function
(In case of low humidity incubation)
Select YES
[ Hi-Temp Cycle
Daily Temp. Gap- Time Setting Screen ]
[ Hi-Temp Set
Daily Temp. Gap- Temperature Setting Screen ]
Auto incubation
QUICK SET
button (Selection of Reptiles)
ENTER button (Auto incubation starts after two seconds)
ENTER button
OTHER (MANUAL) incubation
MENU button
UP/DOWN button
(Selection of Reptiles)
The reptile incubation temp
①
on the menu screen
is memorized in the micro chips. User can
optionally change the incubation temperatures.
(Initial settings: depending on types of reptiles.)
The reptile incubation Humidity
②
on
the menu screen is memorized in the micro chips.
User can optionally change the incubation Humidity.
(Initial settings: depending on types of reptiles.)
Daily Temp. Gap function
③
is to make
the environment of incubator to be the hottest period
in the day by user. User can input temperature and
time to make the optimum environments for incubation
of reptiles. (Initial settings:
③
three hours.)
▶
Incubation environments such as temperature, humidity, egg rotation, etc. are automatically controlled
in automatic mode. User only needs to select type of reptile. User can change incubation environment
if it is necessary.
[ Humidity setting screen ]
[ Temperature setting screen ]
Incubation completion
(under incubation)
Temperature setting
Humidity setting
Daily Temp. Gap- Temperature Setting
Daily Temp. Gap- Time Setting
It increases the daytime temperature by set temperature
④
and the daytime period by set time
③
in the above STEP 3.
In case of reptiles, it is quite often to set the temperature
higher than the incubation temperature by 1.5
℃
.
(Initial settings: depending on types of reptiles
④
.)
▶
QUICK SET
button
:
This button is used to reset the incubation environment
(temperature, humidity, daytime temperature) during
auto or manual incubation. If
QUICK SET
button is pressed,
temperature window blinks in the incubation progressing screen.
When changing temperature, set the temperature with
up/down button and press enter button after resetting.
It will be then stored and converted to incubation screen
after five seconds.
[ Daily Temp. Gap Setting Screen ]
Hi-Temp Set
26.1
80
0.0
3H
24 Hour
③
④
Temperature
Chameleon
26.1℃
NEXT
①
NEXT
Humidity
Chameleon
80%
②
NEXT
Hi-Temp Cycle
Chameleon
3 Hour
③
Hi-Temp Set
Chameleon
0.0℃
START
④
**Choose a kind**
* Chameleon
* Snake
* Alligator
* Gecko
* Turtle
* Tortoise
* Others
Eg.) In case of reptiles, their incubation temperature
is 26.1
℃
. If the daytime period is set to three hours
and daytime temperature to 1.5
℃
,
the incubation temperature changes from 26.1
℃
to 27.6
℃
for three hours once a day.
Chameleon
26.1
80
3Hr
0.0
Chameleon
26.1
80
3Hr
0.0
Others
37.5
55
3Hr
0.0
System finish
Are you sure?
YES
▶
Auto Incubation:
Optimum incubation conditions for the species of reptiles are memorized in micro chip.
With this function, you can easily operate this incubator.
Select the species of reptile at MENU screen with QUICK SET button,
and press ENTER button for about 2 sec. for starting incubation.
▶
Other (Manual ) Incubation:
Other (Manual) incubation is for incubating the species of reptiles which is not memorized in the incubator.
User can set the incubation condition according to their needs. (LCD Display will indicate as the graph above.)
Press MENU button at basic screen, and select "Others" with UP/DOWN button, and then ENTER button.
Set the temperature, humidity, and daily temperature gap as your needs and press ENTER button.
▶
You shift to next mode with pressing
QUICK SET
button 1 to 4 times.
You can also use it when you want to check incubation conditions under incubation.
10. Easy Function Operation
Incubation starts.
Temperature setting
①
Temperature Setting-
Incubation Temp. Setting
Humidity setting
②
Humidity Setting-
Incubation Humidity Setting
Daily Temp. Gap Setting
③
Daily Temp. Gap - Time Setting
ENTER button
(incubation completion)
MENU button
UP/DOWN button
("yes" selection)
④
Daily Temp. Gap - Temperature Setting
HOME screen before
starting incubation
MANU screen
Screen showing
incubation is in progress
Screen showing incubation
of other
Reptiles
is in progress
Screen showing
completion of incubation
▶
What is Daily Temperature Gap Function?
This function is for making the incubation condition same with natural conditions.
It creats the highest temperature time zone by sun in nature artificially.
This function helps the hatching rate raise with optimum incubation conditions by the
user directly set the proper temperature and time.
11. How to start incubation by Auto or Manual
If you leave the incubator alone without drying water after high humidity incubation,
the water inside of incubator condense and make waterdrop at the LCD display or
control device. For preventing this problem, disassemble main body 1 and 2, and
dry completely before storing. ( You can dry the incubator as operating the
incubator for about 1 to 2 hours after removing water.)
If you do not want to change the incubation environment, press
QUICK SET
button to move to the next stage.
This will be converted to incubation screen after five seconds.
back
▶
After start incubation, press SET UP button and go to T.CAL on incubation process.
If you press ENTER here ' WARNING ' will show on LCD. It goes to calibration Mode automatically
after 5 sec. Then, calibrate the temperature with UP/ DOWN button and press ENTER button for saving.
( How to calibrate Humidity : It is same with the way calibrating temperature on H.CAL )
AU
TOELE
X
AU
TOELE
X
AU
TO
EL
EX
AU
TO
EL
EX
ⓐ
Hatching result can be changed by a large number of factors.
Autoelex Co.,Ltd. will not be held responsible for loss of eggs or reptiles under any circumstances
such as hatching failure, user’s carelessness, power failure, or malfunction.