RPCMCli version 0.7.7 is starting
user rpcmadmin successfully authenticated from 192.168.xx.yy, access level
superuser
Auto-logout time is set to 3600 seconds
[Serial Name]: SuperGeroy [Temperature]: 28C
[Serial Number]: RU2017101100000002MO01DN01 [Ground]:
GOOD
[Firmware Version]: 0.9.454 [Release Date]: 20180515164154
[Software Version]: 0.7.7 [Software Release Date]: 20180515185713
[Uptime]: 02:20:32 [Model/Hardware Version]:
1502/RPCM
[Force Failback]:
OFF
[Failback Delay in Seconds]:
0
-------------------------------------------------------------------------------
[Input 1]: 233V @ 49.99Hz 2.338A 0.493KW (ACTIVE, PRIORITY)
[Input 2]: 232V @ 49.99Hz 0.000A 0.000KW
-------------------------------------------------------------------------------
[Output 0]:
OFF <admin: ON> 0mA 0W
(OVERLOAD)
[Output 1]:
ON <admin: ON> 251mA 52W
(OVERLOAD)
[Output 2]:
ON <admin: ON> 223mA 46W
[Output 3]:
ON <admin: ON> 530mA 112W
[Output 4]:
ON <admin: ON> 586mA 125W
[Output 5]:
ON <admin: ON> 223mA 46W
[Output 6]:
ON <admin: ON> 525mA 112W
[Output 7]:
ON <admin: ON> 0mA 0W
[Output 8]:
ON <admin: ON> 0mA 0W
[Output 9]: OFF <admin: OFF> 0mA 0W
Type 'help' to get suggestions
SuperGeroy [192.168.xx.yy] 0 rpcmadmin >
6. Connecting via SSH
To connect via SSH protocol in UNIX-based systems, it will be sufficient to indicate from within
the terminal's emulator the command: ssh
ip_address.
In the MS Windows environment, you can use the PUTTY program. You will need to configure
settings in the Sessions section of this program. If you have any question about SSH clients, e.g.
PUTTY, please consult the relevant documentation.
RPCM's system during access via SSH uses username and password authentication.
Default user name and password:
user name —
rpcmadmin
password —
rpcmpassword
Example our device's IP is 192.168.xx.yy:
ssh 192.168.xx.yy
In response, username and password will be requested:
login as: rpcmadmin
[email protected]'s password:
Alternatively, you can create a username right away:
In this case, the system will request that you enter only the password:
[email protected] password:
Fig. 10. An example of the console screen when logging in via SSH for the RPCM 1502 or
RPCM 1532 models (RPCM ME 1563 has one input)
6