
9212i Keypad Installation Instructions
(Continued)
©2013 RutheRfoRd contRols • www.RutheRfoRdcontRols.com
USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAmBRIDGE, ON N1T 1j6
PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-mAIl: SAlES@RUTHERFORDCONTROlS.COm
WHITE
ORANGE
WHITE/ORANGE
BROWN
WHITE/YELLOW
BLACK
RED
WHITE/BLACK
WHITE/RED
WHITE/BLUE
WARNING: Plug this harness in with the leads
facing down! Permanent damage may result if
incorrectly inserted.
Fig. 6 9212i Wiring Harness.
WARNING: Plug this harness in with the leads facing down! Permanent damage may result if incorrectly inserted.
Wire Color
Wire Function
White
Not Used
White/Blue
Output 3 (50mA sink to ground)
White/Red
Output 2 (50mA sink to ground)
Orange
Output 4/panic (50mA sink to ground)
Brown
Remote Triggering Input (REX)
White/Orange Remote Triggering Input (REX)
White/Black
K (in) Keypad Active
White/Yellow K (out)
Black
Ground (outputs only)
Red
V+ Filtered (outputs only)
5
- Yellow LED
+ Yellow LED
-
-
+
+
Green LED
Red LED
Green LED
Red LED
J2 – remove
jumper for
24V operation
TS1 Terminal Strip
SW1 Program
Switch
V+ V- N/C C N/O
Fig. 5 9212i Circuit Board