RCF VSA SMART RC, Руководство пользователя, Страница: 14 / 20

14
ENGLISH
REMOTE CONTROL CONNECTION
Connect the remote control VSA SMART RC to the smartphone by
inserting the cable with 3.5mm jack into the headset.
Start the application from your smartphone.
NOTE . Make sure the MULTIMEDIA volume is turned up, to ensure
optimal transmission with the speaker.
The remote must be properly pointed towards the speaker to be configu-
red .
If speakers are close to each other, turn off the ones that should not be
subject to the configuration.
Receiving settings using the remote control are confirmed by an acoustic
signal from the speaker:
- Dual Tone (f: 1.8 kHz): change configuration (preset);
- Single tone (f: 1.8 kHz): other controls (volume, etc.).
HOMEPAGE
Application HOMEPAGE provides direct access to all configuration functions, namely:
FOCUS and BEAM
: configuration modes.
VOLUME
: setting the volume of the speaker.
EQUALIZER
: setting speaker equalization.
PHASE
: setting the phase of the signal.
DELAY
: setting the delay value.
INPUT
: audio input selection.
LOCK
: protection / configuration lock
To access each feature, press the corresponding button.