RCF UP 9501, Руководство пользователя

Страница: 23 / 40

23
ENGLISH
BAND n
(I, II, III)
FREQ Centre frequency setting.
GAIN Gain setting.
BYPASS EQ Select either ON (equalizer bypassed) or OFF (equalizer inserted).
BAND n
(I, II, III, IV, V)
FREQ Centre frequency setting.
GAIN Gain setting.
BYPASS EQ
Select either ON (equalizer bypassed) or OFF (equalizer inserted).
LO CUT
(hi-pass filter)
Filter that cuts low frequencies below the cutoff frequency.
It has a single parameter: the cutoff frequency.
5-BAND EQ
The five bands are semi-parametric equalizers that allow to choose the centre frequency
and adjust its level.
PARAMETERS
COMPRESSOR
The compressor does not modify a signal having a level lower than the predetermined
threshold and compresses a signal (ratio 3:1) with a higher level.
The threshold can be set to three different levels:
–30 dBu (curve 1), –20 dBu (curve 2), –10 dBu (curve 3).
CURVE 2 CURVE 1 CURVE 3
PARAMETERS
ATTACK Adjusts the compressor attack time.
POST GAIN
Adjusts the output gain (useful to minimize the signal
attenuation due to compression).
HOLD
Adjust how long the compression is held after the audio
signal returns below the predetermined threshold.
DECAY Adjusts the compressor release rate.
CURVE
Curve selection:
-
Curve 1
-
Curve 2
- Curve 3
BYPASS
Select either On (compressor bypassed) or Off (compressor
inserted).
PARAMETERS