RCF TTL31-A, Руководство пользователя

Страница: 31 / 56

WARNING TO BE USED ONL
Y FOR STACKING APPL
ICATIONS UP TO 4 TTL33 MOD
ULES NEVER USE FOR SUSPENDING SPEAKE
RS
AVERTISSEMENT
EMPLOYER SEULEM
ENT POUR EMPILER JUSQUE A 4 MODULES
TTL33 NE JAMAIS EMPL
OYER POUR SUSPEN DRE DES
HAUT-PARLEURS
CONFIGURATIO
N HOLE ON THE F RAME
7
5
3
0
7
5
-6
-8
-6
-8
1 2 3
31
The bottom box in a stacked array can be tilted with
2 degrees steps to obtain proper coverage patterns
(from +11° to –8°) as shown in the figure.
Reverse and connect the 2 rear STCK BAR TTL33A bracket to the first
enclosure using the hole for the proper angle and quick lock pins
Add TTL33A cabinets one by one as indicated for flown configurations. Up to four TTL33A enclosures can be stacked and
interlinked using the standard TT+ rigging components and the FLY BAR TTL33A flying frame as ground support.
Ground stacking summary: possible configurations
The configuration No. 1 requires:
No. 1 Stack bar accessory STCK BAR TTL33A p/n 13360057 of
which all bars will be used, and additional Nos 16 pins (Nos 4
AC-QL PIN4X p/n 13360060).
The configuration No. 2 requires:
No. 1 Stack bar accessory STCK BAR TTL33A p/n 13360057 of
which only 2 bars type A) and 2 bars type B) will be used, and
additional Nos 8 pins (Nos 2 AC-QL PIN4X p/n 13360060).
The configuration No. 3 requires:
No. 1 Stack bar accessory STCK BAR TTL33A p/n 13360057, of which
only 2 bars type B) will be used, and no additional pins are required.