4
CABINET
TT+ Series constant directivity horns are moulded in pure thick aluminium for improved heat-sink. The shape of the
horns is a unique design able to provide exceptional constant directivity.
The cabinet offer 2 different side angles for near distance or far distance monitor position.
The cabinet is in Baltic birch, heavy duty painted. The steel metal grille is heavily powder coated.
The cabinet is equipped with fly tracks and threaded inserts for fixed installation.
REAR PANEL CONNECTIONS
WARNING
: To prevent the risk of electric shock,
do not connect the speaker with the amplifier switched on
.
Before using the speaker, check to make sure that all the connections have been made correctly, to prevent
accidental short circuits from giving rise to electric sparks.
1.
INPUT
is a Neutrik NL4F Speakon connector for connecting a speaker-level signal.
2.
OUTPUT
is a Neutrik NL4F Speakon connector that is paralleled with the INPUT for daisy-chaining
speakers.
The Speakon connectors use the following wiring standard:
Pin 1+ = Signal (+)
Pin 1– = Ground (–)
INSTALLATION
A 35 MM socket for mounting the loudspeaker on a speaker stand is provided in the bottom of the cabinet. Always
make sure that the pole mount that is used is able to sustain the speaker weight with a proper safety factor.
TT+ speakers MUST be suspended only with approved rigging hardware.
WARNING:
In case of permanent installation always plan and execute specific inspections to verify all the parts
which must guarantee the security of the system / installation over time (brackets, screw anchors, screws, cabinets,
etc.).