RCF RX 4000, Руководство по обслуживанию

Страница: 79 / 87

SERVICE MANUAL SYSTEM RX 4000
January 2009 Version 1.9 Page 79 di 87
5.4.1 Cause and Effect Menu
In the Cause and Effect menu is possible:
You can change the priority level list by dragging icons to the right position (in the column
Inputs by priority Highest at top ; lowest is the number, highest is the priority).
The central column (under the label
Reset ) is the Y-axis of a matrix where you can see all the
possible events (names, icons, command symbols). The X-axis is the list of available outputs /
zones (max. 16). It is possible to assign each event to 1 or more outputs by selecting the source
first (clicking on the relevant icon of the column Type), then by clicking on the intersection of the
event column (Y axis) and the output (X axis).
This menu permits a visual and audible (if loudspeakers are connected to the PC) simulation of
the system settings. Clicking on whichever event, you’ll see the relevant source assigned to the
selected output(s).