RCF P 8015-S, Руководство пользователя

Страница: 14 / 28

1
ENGLISH
NOTES ABOUT LOW IMPEDANCE CONNECTIONS
The total loudspeaker impedance must not be lower than the amplifier output impedance.
Note: a loudspeaker total impedance equal to the amplifier output one permits to get the
maximum deliverable power (but an higher loudspeaker impedance entails less power).
The total loudspeaker power shall be adequate for the maximum deliverable power of
the amplifier.
The loudspeaker line shall be short (for long distances, it may be necessary to use cables
with large cross-section wires).
Always use cables having wires with an adequate cross-section, considering the cable
length and the total loudspeaker power.
Loudspeaker lines must be kept separated from mains cables, microphone cables or
others, in order to avoid inductive phenomena may cause hum or noises.
Use loudspeaker cables with twisted wires to reduce hum caused by inductive effects
due to coupling with electromagnetic fields.
Do NOT connect the low impedance input directly to 100 V constant voltage lines.
-
-
-
-
-
-
-
TOTAL IMPEDANCE: 8
Ω
8
Ω
TOTAL IMPEDANCE: 4
Ω
8
Ω
8
Ω
+
+
+
NOTES ABOUT LOW
IMPEDANCE CONNECTIONS