background image

ENGLISH

Before connecting and using this product, please read this instruction manual carefully and keep 
it on hand for future reference. The manual is to be considered an integral part of this product and 
must accompany it when it changes ownership as a reference for correct installation and use as 
well as for the safety precautions.

RCF  S.p.A. 

will  not  assume  any  responsibility  for  the  incorrect  installation  and  /  or  use  of  this 

product.

WARNING: 

To  prevent  the  risk  of  fire  or  electric  shock,  never  expose  this  loudspeaker  to 

rain or humidity and dust, but the case this has been expressly designed and made to get a 
suitable IP protection grade (indicated in the product specifications).

SAFETY PRECAUTIONS

1.  

All the precautions, in particular the safety ones, must be read with special attention, as they 
provide important information.

2.  

Make sure all connections have been made correctly before switching all devices on.

3.  

Protect the mic. cable from damage; make sure it is positioned where it cannot be stepped on 
or crushed by objects.

4.

   Do not put the microphone into water (or another liquid), do not throw it.

5.

   Never attempt to carry out any operations, modifications or repairs.

 

If the microphone does not work properly, contact your authorized service centre.

6.

   If the “Phantom” power supply is present at the connected mixer input, make sure the mic. 

cable is balanced.

7.

   Should  the  microphone  emit  any  strange  odour  or  even  smoke, 

turn  the  sound  system  off 

immediately, then disconnect the microphone.

8.

   Use dedicated accessories only.

9.   RCF S.p.A. strongly recommends the sound system installation is only made by professional qualified 

installers (or specialised firms), who can certify it according to the regulations in force. The entire audio 
system must comply with the current standards and regulations regarding electrical systems.

10. 

There  are  numerous  mechanical  and  electrical  factors  to  be  considered  when  installing  a 

professional  audio  system  (in  addition  to  those  which  are  strictly  acoustic,  such  as  sound 
pressure, angles of coverage, frequency response, etc.).

11.

 Do not aim the microphone to near loudspeakers, in order to avoid feedback.

12. HEARING LOSS

 

Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level 
that  leads  to  hearing  loss  is  different  from  person  to  person  and  depends  on  the  duration 
of exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure, 
anyone  who  is  exposed  to  these  levels  should  use  adequate  protection  devices.  When  a 
transducer capable of producing high sound levels is being used, it is therefore necessary to 
wear ear plugs or protective earphones.

13. 

 Microphones are to be connected in phase, in order to guarantee a proper sound reproduction, 
especially when microphones are adjacent one another.

14. 

 To prevent inductive effects from causing hum, noise and a bad system working, mic. cables 
should be shielded, balanced and not be laid together with other electric cables (mains) and 
loudspeaker lines.

15. 

 Keep the microphone far from any excessive heat source. Do not use solvents, alcohol, benzene 
or other volatile substances for cleaning the external parts. 

IMPORTANT NOTES

Содержание MD 7600













Отзывы: