
9
ENGLISH
WARNING:
loudspeaker connections should be only made by qualified and experienced
personnel having the technical know-how or sufficient specific instructions (to ensure
that connections are made correctly) in order to prevent any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the amplifier is
switched on. Before turning the system on, check all connections and make sure there are
no accidental short circuits.
The entire sound system shall be designed and installed in compliance with the current
local laws and regulations regarding electrical systems.
‘Media’ series loudspeakers are designed for indoor use only. If installed outdoor,
loudspeakers shall be protected against water.
The impedance value of each loudspeaker is 8
Ω
.
Connect the positive wire (amplifier ‘+’ output) to the pin ‘INPUT +’ of the 4-pin
EUROBLOCK connector. Connect the negative wire (amplifier ‘–’ output) to the pin
‘INPUT –’ of the 4-pin EUROBLOCK connector.
The ‘LINK +’ and ‘LINK –’ pins are useful to link another loudspeaker in parallel.
CONNECTIONS
Содержание M 501
