RCF HPS1500, Руководство пользователя

Страница: 19 / 20

1
ENGLISH
SPEAKON CONNECTOR WIRING (amplifier outputs)
COOLING REQUIREMENTS
HPS amplifiers have a forced air cooling system to maintain a low operating temperature.
Make sure there is enough space around the front of all amplifiers (to allow air to enter) and around
to allow the heated air to exit. If amplifiers are rack-mounted, do not use doors or covers on the
front and the rear of the rack cabinet(s).
Negative output
Positive output
To loudspeakers
2-
2+
1+
1-
Negative output
Positive output
To loudspeakers
2-
2+
1+
1-
SPEAKON SPEAKON
STEREO / MONO MODE BRIDGE MODE
SPECIFICATIONS
HPS 2500 HPS 1500
Power output RMS, bridged
stereo 2 x 1400 W @ 2 Ω
2 x 1100 W @ 4 Ω 2 x 750 W @ 4 Ω
2 x 700 W @ 8 Ω 2 x 450 W @ 8 Ω
bridged 2800 W @ 4 Ω
2200 W @ 8 Ω 1500 W @ 8 Ω
Frequency response
THD @ 1 kHz
Damping factor @ 8 Ω
Slew rate
Signal / noise ratio
Input sensitivity (/ voltage gain)
Input impedance
Cooling
Operation voltage
Dimensions (w, h, d)
Net weight 19 kg 17 kg
20 Hz ÷ 20 kHz
0.05 % , 1 dB below clip
> 300
50 V / μs
106 dB
1.4 V (/ 32 – 26 dB)
20 kΩ (balanced), 10 kΩ (unbalanced)
Temp., DC, RFI, short-circuit
220 ÷ 240 V (50 / 60 Hz)
482 mm, 88 mm, 420 mm (2 unit rack)