4
ENGLISH
SAFETY AND OPERATING
PRECAUTIONS
IMPORTANT NOTES
IMPORTANT NOTES
Before connecting and using this product, please read this instruction manual
carefully and keep it on hand for future reference. This manual is to be considered
an integral part of this product and must accompany it when it changes
ownership as a reference for correct installation and use as well as for the safety
precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and /
or use of this product.
SAFETY AND OPERATING PRECAUTIONS
1.
All the precautions, in particular the safety ones, must be read with special
attention, as they provide important information.
2.
Speaker lines (amplifier outputs) can have a sufficiently high voltage (i.e. 100-
70 V) to involve a risk of electrocution: never install or connect speakers when
the line is alive.
3.
Make sure all connections have been made correctly and the speaker input
voltage is suitable for the amplifier output.
4.
Protect speaker lines from damage. Make sure they are positioned in a way
that they cannot be stepped on or crushed by objects.
5.
Make sure that no objects or liquids can get into this product, as this may
cause a short circuit.
6.
Never attempt to carry out any operations, modifications or repairs that are
not expressly described in this manual.
Contact your authorized service centre or qualified personnel should any of the
following occur:
-
The speaker does not function (or works in an anomalous way).
-
Its cable has been damaged.
-
Objects or liquids have got into the unit.
-
The speaker has been damaged due to heavy impacts or fire.
7.
Should the speaker emit any strange odours or smoke, remove it from the line
after having immediately switched the amplifier off.
8.
Do not connect this product to any equipment or accessories not foreseen.
Do not try to hang this speaker by using elements that are unsuitable or not
specific for this purpose.
Check the suitability of the components used for attachment (i.e. wall plugs,
screws, brackets not supplied by RCF, etc.), which must guarantee the security of
the system / installation over time, also considering, for example, the mechanical
vibrations normally generated by transducers.
