RCF FORUM FDC9900, Руководство пользователя, Страница: 33 / 52

33
ENGLISH
2.3 CAMERA SETUP
2.3.1 SLOW SHUTTER: frame accumulation with two options Manual/Automatic. When camera
screen is opened under automatic state, ASS displays on screen.
2.3.2 BACK LIGHT: backlight compensation ON/OFF.
2.3.3 ICR SHOT: low shooting,ON/AUTO
2.3.4 IRIS: setup of automatic iris AUTO/MANU.
2.3.5 D-ZOOM: setup of digital zooming ON/OFF.
2.3.6 FOCUS: setup of automatic focusing AUTO/ MANU.
2.3.7 WB SET: setup of white balance. ATW / INDOOR / OUTDOOR / ONEPUSH / AUTO / MANU
2.3.8 MENU OF CAM: blank
2.3.9 RETURN: return to MAIN MENU.
2.4 CONTROL SETUP
2.4.1 AUTO FLIP: 180° automatic flip of dome camera ON/OFF.
2.4.2 ALARM: blank.
2.4.3 PRESET PIC: if image is followed when calling preset point or making tour. FREEZE – when
switching scene to freeze image and to recover otherwise; MOVE – when switching scene
no image frozen.
2.4.4 HOME OPTION: enter the submenu of automatic home function.
2.4.4.1 AUTO HOME: when it is set at ON, home function is available, namely, the dome camera
will return HOME if user has no action in a period of time. The dome camera shall not return
HOME if it is on tour state. If no HOME is needed when the dome camera is stopped, set
the option at OFF.
2.4.4.2 HOME POS: HOME means return home. For example to set one scene as HOME, call
the scene first and set it as preset point, then call out the menu to enter into this submenu,
change figures after HOME POS into 5. If automatic HOME function is needed, do not
forget to set AUTO HOME at ON. The preset points of HOME POS are from 1 to 63 and 65
to 128.
2.4.4.3 DWELL TIME: to set the time of automatic HOME, which means the camera shall return
HOME if it is not controlled in a period of time which can be from 1 to 99 minutes.
2.4.4.4 RETURN: return to the menu one level higher.
2.4.5 RETURN: return to MAIN MENU.
2.5 CAMERA MASK SET
2.5.1 MASK PRIVACY: blank.
2.5.2 MASK SHADE: blank.
2.5.3 MASK REGION: blank.
2.5.4 RETURN: return to Main Menu.
2.6 PROGRAM OPTIONS
2.6.1 AUTO PAN START POS: To set start position of auto scan between two points. To move the
dome camera by joystick after entering and to return by CLOSE button.
2.6.2 AUTO PAN END POS: To set end position of auto scan between two points. To move the
holder by joystick after entering and to return by CLOSE button.
2.6.3 RUN AUTO PAN: Auto scan function between two points. First of all, you must set the start
position and the end position of auto scan. If the start position is just the end position, it
means 360° scan. The speed of auto scan has six grades: FAST / NORMAL/SLOW/-FAST
/-NORMAL/-SLOW in which the first three grades are scan less than 180° while the later
three grades larger than 180°. Adjust speed by PAN LEFT/PAN RIGHT, and operate and
exit by OPEN button. The start position and the end position of auto scan are set by options
1 and 2 in this submenu.
2.6.4 SET TITLE: to edit titles of preset position. Only previous 63 preset points have their titles.
Select no. of preset point by PAN LEFT/PAN RIGHT, enter into edit by OPEN button and exit
edit by CLOSE button. Operations under edit state can be seen later.
2.6.5 SET PATROL: to edit data for multi-points patrol. Select no. of patrol by PAN LEFT/PAN