RCF F 16XR, Руководство пользователя, Страница: 12 / 28

12
[36] POWER SWITCH
Use this switch to turn on and off your F 16XR mixer.
[37] POWER SUPPLY INLET
Connect here the power cord provided. The internal power supply accepts power from 100 V to
240 V AC 50-60 Hz.
[38] USB TYPE B PORT
Use this to connect your computer for audio stereo recording of the MAIN MIX signal and audio
stereo playback. The computer connection does not require any driver and allows the recording and
reproduction of PCM audio at 44.1/48.0 kHz - 16 Bit. The audio signal coming from a computer
connected to the USB port could be reproduced through Channel 11/12 audio path (see section
[14]
of this manual).
[39] AUX OUTPUTS
These TRS jack connectors p4 dB balanced audio output coming from auxiliary sends. Connect
your stage monitors or external effects input here.
[40] BUS OUTPUTS
These four balanced TRS jacks p4 dB audio out coming from BUSSES 1/2 and 3/4. The audio
levels of BUSSES 1/2 and 3/4 are controlled by the dedicated fader located on the front panel (see
section
[34] of this manual).
REAR PANEL FUNCTIONS
ENGLISH
CONNECTORS
1/4” JACK CONNECTOR
Sleeve = Ground
Sleeve
Tip
Ring
Tip = Hot
Ring = Cold
BALANCED (TRS)
Sleeve = Ground
Sleeve Tip
UNBALANCED (TS)
Tip = Hot
Tip
Sleeve = Ground
Ring = Right Channel
Tip=Left Channel
PHONES (TRS)
Ring
Sleeve
XLR CONNECTOR
Connector pinout:
1 = earth
2 = audio signal (+ or “hot“)
3 = audio signal (– or “cold“)
XLR Connector (F) XLR Connector (M)