background image

4

ENGLISH

SAFETY PRECAUTIONS

IMPORTANT NOTES

SAFETY PRECAUTIONS

IMPORTANT NOTES

Before connecting and using this paging microphone, please read this 

instruction manual carefully and keep it on hand for future reference. 

The manual is to be considered an integral part of this product and must 

accompany it when changing ownership as a reference for correct installation 

and use as well as for the safety precautions.

RCF S.p.A. will not assume any responsibility for the incorrect installation and 

/ or use of this product.

SAFETY PRECAUTIONS

1. 

All the precautions, in particular the safety ones, must be read with special 

attention, as they provide important information.

2.

 Make sure all connections have been made correctly before switching all 

devices on.

Do not connect / disconnect paging microphones when the system is 

operating. 

3. 

Protect paging microphone cables from damage and assure they are 

positioned where these cannot be stepped on or crushed by objects.

4.

 Do not put paging microphones into water (or another liquid), do not 

throw nor drop them.

5.

 Never attempt to carry out any operations, modifications or repairs.

If a paging microphone does not work properly, contact your authorized 

service centre.

6.

 Should the paging microphone emit any strange odour or even smoke, 

turn the sound system off immediately and disconnect it (from both the 

system and the mains supply).

7. RCF S.P.A.

 strongly recommends the sound system installation is only 

made by professional qualified installers (or specialised firms), who can certify 

it according to the regulations in force.

The entire audio system must comply with the current standards and 

regulations regarding electrical systems.

8. 

Mechanical and electrical factors need to be considered when installing 

a professional audio system (in addition to those which are strictly acoustic, 

such as sound pressure, angles of coverage, frequency response, etc.).

9.

 Do not point a microphone towards a nearby speaker, in order to avoid 

any possible feedback. 

10. 

Hearing loss

Exposure to high sound levels can cause permanent hearing loss. The acoustic 

pressure level that leads to hearing loss is different from person to person and 

depends on the duration of the exposure.

To prevent potentially dangerous exposure to high levels of acoustic pressure, 

anyone who is exposed to these levels should use adequate protection devices.

When a transducer capable of producing high sound levels is being used, it is 

necessary to wear ear plugs or protective earphones.

Содержание BM 404

























Отзывы: