
1
ENGLISH
RCF S.p.A. would like to thank you for purchasing this product, which
has been designed to guarantee reliability and high performance.
DESCRIPTION
AT 40T
volume control is made of a control circuit having a selector and a
separated transformer.
It can be used in 100 V line systems to adjust the volume level of a loudspeaker
group having a total power not exceeding 40 W.
All connected loudspeakers shall have 100 V line matching transformers.
It includes a 24 V dc override relay to either bypass the 6 position (5 + off)
selector or insert a second 100 V line (not affected by the volume control) for
paging.
It can operate with 3 wire lines as well (in order to make emergency
announcements without using the internal 24 V dc relay).
AT 40T
can be installed on whichever supporting frame for home / office
electrical systems by drilling a hole in a blank key and fixing the control
circuit.
3 knobs are included in 3 different colours: white, silver, anthracite.
If there is enough room, the transformer can be put inside the wall / flush-
mounted box (where the control circuit is).
CONNECTIONS
WARNING:
connections should be only made by qualified and experienced
personnel having the technical know-how or sufficient specific instructions (to
ensure that connections are made correctly) in order to prevent any electrical
danger.
To prevent any risk of electric shock, do not connect volume controls /
loudspeakers when the amplifier is switched on. Before turning the system on,
check all connections and make sure there are no accidental short circuits.
The entire sound system shall be designed and installed in compliance with
the current local laws and regulations regarding electrical systems.