11
ENGLISH
RCF S.p.A. would like to thank you for purchasing this product, which
has been designed to guarantee reliability and high performance.
DESCRIPTION
AT 20T
volume control is made of a control circuit having a 6 position (5 + off)
selector and a separated transformer. It can be used in 100 V line systems
to adjust the volume level of a loudspeaker group having a total power not
exceeding 20 W.
All connected loudspeakers shall have 100 V line matching transformers.
It can be set (through an internal jumper) to operate with 3 wire lines (in order
to make emergency announcements at the max. volume).
AT 20T
can be installed on whichever supporting frame for home / office
electrical systems by drilling a hole in a blank key and fixing its control
circuit.
3 knobs are included in 3 different colours: white, silver, anthracite.
The transformer can be put inside the wall / flush-mounted box (where the
control circuit is).
CONNECTIONS
WARNING:
connections should be only made by qualified and experienced
personnel having the technical know-how or sufficient specific instructions (to
ensure that connections are made correctly) in order to prevent any electrical
danger.
To prevent any risk of electric shock, do not connect volume controls /
loudspeakers when the amplifier is switched on. Before turning the system on,
check all connections and make sure there are no accidental short circuits.
The entire sound system shall be designed and installed in compliance with
the current local laws and regulations regarding electrical systems.
AT 20T
AT 20T
20 W
20 W