RCer dragonus II plus, Руководство пользователя

Страница: 2 / 31

Copyright RCer International co., ltd 1
Index
Read before assembly
…………………
1
How to use this instruction manual
…………………
4
Parts List
…………………
5
Necessary tools & wire connection
schematic
…………………
6
Part types and sizes
…………………
7
Assembly steps
…………………
8
Servo installation
…………………
21
Pitch and throttle setting
…………………
23
Parts replacement
…………………
24
Spare parts List
…………………
26
1.
Read Before Assembly
For Safety reasons, observe the following precautions before assembly
Thank you for purchasing RCer Dragonus II Pro(D2 Pro)electric powered helicopter. This Helicopter is well designed for 3D flying by using
400-480 class motor .Because of its Light-weight enhanced frame design, precisely CNC processing, Hi-end carbon material and adjustable
pitch &
Bell-Hiller mixed
rate system, so you can get outstanding Flying performance from it.
For getting BEST 3D Flying performance, we recommend you to use the Warp4 series brushless motor; You can also try to use Revolution
series brushless motor for light-weight & saving power setting
。
In order to flying this helicopter safety and funny, please read this manual, then begin assembling and operating.
Please keep this Instruction Manual properly for further repair or adjustment reference.
The meaning of symbols and signal words
The meaning of symbols and signal words at the head of cautionary notes are as explained below. Even comments marked with
注意
CAUTION
may result in serious harm depending on the circumstances.
WARNING
Mishandling due to failure to follow these instructions
may result in severe injury or death.
CAUTION
Mishandling due to failure to follow these instructions
may result in serious harm.
FORBIDDEN
Do not attempt under any circumstances.
(Note)Implies important information regarding this product assembly, operation, or maintenance.
*Before assembly, read the instruction manual thoroughly familiarizing yourself with the units structure and assembly procedures.
*Before assembly, check the quantity of parts and their descriptions. After the packing has been opened, parts can
’
t be exchanged or
returned. In the event of any missing or defective parts, have the store from where you purchased the product stamp you user
’
s card and
send it with the name and description of the parts to RCer Sales Department.