RCD BC2E, Инструкция по эксплуатации

Страница: 6 / 17

INSTRUCTIONS FOR THE USER
34
5. Press the "S9" button to select the wash cycle according to conditions of
the dishware:
•
(H9a ON ) ................ short cycle ............ for glasses and cups
•
(H9b ON) ................. medium cycle........ with normally dirty dishes
•
(H9c ON) ................. long cycle .............. with particularly dirty dishes or
. deep dishes
•
(H9a-b-c ON)........... intensive wash ...... max 8 min.
6. Close the door and press the "S3 start" button to start cycle.
The lamp flashes.
The activation of a cycle is shown by the flash of the lamp:
H9a for the short cycle
H9b for the medium cycle
H9c for the long cycle
H9a-b-c alternating for the intensive wash (max 8 min.).
It is possible to perform an intensive wash (lamp "H9a-b-c" OFF) that will
remain activated until the "S3 start" button is pressed again or a maximum
time of 8 min. is reached; the pause, rinse and drain (if required) phases will
follow.
To opening the front door, the lamp "H14" flashes quickly.
To start up the the cycle AUTOMATICALLY (by opening and closing the
door), you will need to change the cycle start up mode. Press and hold the
"S9" button (approx. 10sec) until the pre-selected cycle lamp remains
blinking lite and the washing cycle will then start up AUTOMATICALLY
when the door is closed.
ATTENTION: Machine in conformity with the existing hygienic
standards, guaranteeing a final rinse at 85°C. Wash cycle automatically
lengthened if final rinse temperature is not reached.When this auto-cycle
intervenes and the cycle is pro-longed, after 8 minutes the "H14"
indicator flashes to indicate this intervention and the cycle continues
(water supply temperature is likely to be the problem, otherwise contact
an assistance center since it is a rinse water heating intervention.).