[Stable image storing function using back-up power]
In the case of large accident, there is a potential that power will be
severed. However, accident image is saved safely even when power is
severed thanks to the built-in back-up power located in the main body.
At this time, however, image is recorded up to the point when power is
severed for safe image of accident storing, and does not record data
afterwards. Moreover, frames per second of the image may be lower
than the normal frames per second.
[Recording function that uses built-in Flash Memory]
It stores data that occurs due to impact and GPS data to be used for DT
using internal Flash Memory regardless to SD Card.
This product stores images and data up to 60 times for 15 seconds
before and after an accident (total 30 seconds) to allow check image
data using Manager Program mounted on SD Card. (If any accident
occurs after 60 times of accident images are stored, the oldest data is
deleted and new image is stored in the place.)
[Correct Use of SD Card]
If you insert or pull out SD Card during operation of
Card than the one provided when purchasing the product, be sure to
use recommended SD Card for normal operation.
[Capacity of SD Card]
Minimum available SD Card is 2G SD Card, of which 1G byte is used for
copying internal Flash Memory only.
[Image and Vehicle Data Analysis Function]
It is possible to analyze image and data at that time using provided
VEDR software.
P
ro
d
u
ct g
uid
e