RCA X20103, Руководство пользователя, Страница: 4 / 24

Quick Guide to Your TV
Startup
2
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
2
. Plug in the TV
The steps below will get your TV connected and ready for watching. For
more details, see the page numbers listed.
3.
Put Batteries in the Remote
A. Pull off the cover of the battery
compartment.
B. Place two AAA batteries as
shown, matching the
+
and
–
end of each battery in the
compartment.
C. Replace the cover.
CAUTION : Matching stands were designed to be used with 25 inch and larger table model TVs. The
recommended stands are provided with hardware to secure the TV to the stand so that it cannot be easily
pulled off or tipped over. Your RCA dealer can help you choose the appropriate stand for your TV.
If you choose to use a stand with your TV, take precautions that the stand or other furniture the TV is placed
on is properly located and of adequate size and strength to prevent the TV from accidentally being tipped over
or pulled off. This could cause damage to the TV and or personal injury.
Stands are not available by mail order. To locate your nearest RCA dealer call 1-800-336-1900.
OR OR
OR
CABLE /
ANTENNA
Back of TV
Use Only
Adapter
( #193983)
Transformer
( #AH011)
Use Only
Adapter
( #193984)
1
. Hook up your TV
It is important to use only
the adapters specified as
they incorporate special
isolation circuitry to meet
safety regulations. Parts
can be ordered on page 17.
Hook up your antenna or
cable to the TV before you
follow the steps below.
Match your type of antenna or cable
UHF & VHF UHF & VHF VHF UHF
VHF UHF