manualshive.com logo in svg

RCA VRM420, Руководство пользователя

Поделиться
Скачать
RCA VRM420 Скачать руководство пользователя страница 2

This symbol indicates
"dangerous voltage" inside
the product that presents a
risk of electric shock or
personal injury.

WARNING

To reduce the risk of fire or
electric shock, do not expose
this product to rain or moisture.

To reduce the risk of electric shock, do not remove
cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.

This symbol indicates
important instructions
accompanying the product.

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT OPEN.

Caution

: To prevent electric shock, match wide

blade of plug to wide slot, fully insert.

Cable TV Installer:

 This reminder is provided to

call your attention to Article 820-40 of the National
Electrical Code which provides guidelines for proper
grounding and, in particular, specifies that the
cable ground shall be connected to the grounding
system of the building as close to the point of cable
entry as practical.

Power Consumption:

120 V ~ 60Hz

17W

Product Registration

Please fill out the product registration card and return it immediately.  Returning the card allows us to contact
you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record
the serial and model numbers in case you need them. The numbers are located on the back of the VCR.

Model No. _______________________________________________________________________________________

Serial No. _______________________________________________________________________________________

Purchase Date: ___________________________________________________________________________________

Dealer/Address/Phone: ___________________________________________________________________________

Important Information

i

Содержание VRM420





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды