RCA VR708HF, Руководство пользователя

Страница: 39 / 68

VCR Features
Chapter 4 37
Mapping VCR Plus+ System Channels Manually
Using the VCR Plus+ GOLD programming system can make setting up timer recordings for cable or
standard TV easier. If your VCR Plus+ GOLD system setup failed during the interactive Setup, then
you will see a prompt on the screen.
VCR PLUS+ SETUP
Last automatic setup
was unsuccessful.
Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
ON
VCR Plus+ data was not
found.
0 Exit
VCR+ Channel My Channel
5 --
4 --
3 -> -> -> --
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
(Screen shown is only an example.)
If the automatic download continuously fails, you will need to map the channels for
your local service manually. A worksheet and abbreviated codes for typical cable
services in the U.S. and Canada are provided on the following pages.
To Manually Map VCR Plus+ System Channels:
1. Press the MENU button to display the
VCR MAIN MENU
.
2. Press the 4 button to choose CHANNELS .
3. Press the 4 button to choose
VCR Plus+ Setup
.
4. Press 1 to display the Set channel lists menu.
5. Enter the data following the on-screen directions using
your worksheet.