9
Setting Up the VCR
Digital Satellite Receiver Setup
With this setup, the VCR turns on an RCA, PROSCAN, or GE
satellite receiver and tunes it to the desired channel at the start
time of a timer recording. For other brands, the VCR tunes the
receiver to the desired channel only if the receiver is turned on.
Position the satellite receiver above the VCR as shown in the
Connections
section.
1.
Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language
0 Exit
2.
Press 4 to display CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
6 SAT Setup
0 Exit
3.
Press 6 to select the SAT SETUP menu.
SAT SETUP
On what channel does
the VCR receive signals
from the SAT receiver?
(usually 3, 4, or Video)
--
Enter 01-13 or INPUT
Press MENU to cancel
4.
Enter the output channel of your satellite receiver, usually 03,
04, or video line input and press MENU. The VCR confirms
that it receives all satellite receiver signals on the specified
channel.
