16
ON OFF
TV
DBS•SAT
VCR
DVD
CABLE
AUDIO
ON OFF
TV
DBS•SAT
VCR
DVD
CABLE
AUDIO
Programming With Code Search
Identifying Codes From Your Universal Remote
1. Manually turn on the device you wish to
program.
2. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE SEARCH.
3. Press and release the device button for the
device you are programming. The
INDICATOR LIGHT
will blink once,
then remain lit.
4. Press and release
ON•OFF
until your
device turns off.
Important:
You may have to press
ON•OFF up to 200 times.
5. When your device turns off, press
ENTER
, the
INDICATOR LIGHT
will
turn off.
1. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE SEARCH.
2. Press and release the device button for
the code you are retrieving. The
Indicator Light will blink once.
3. Press and release
CODE SEARCH
. The
INDICATOR LIGHT
will turn off.
4. Starting with
0
on the keypad, press the
number buttons in order (
0-9
) until the
INDICATOR LIGHT
blinks.
5. The number which causes the indicator
light to blink is the first digit of your
code.
6. Repeat step 4 until you have retrieved all
three numbers in the code.
If your TV, VCR, DBS Satellite System, DVD Player, Cable Box or
Audio System does not respond after you have tried all the codes for
your brand, or if your brand is not listed, try searching for your code
by following the steps below.
If you need to find the three-digit code for your TV, VCR, DBS
System, Cable Box or Audio System after your device is set-up
use this procedure.
(OFF)
INDICATOR
LIGHT
ON OFF
ENTER
…
(OFF)
INDICATOR
LIGHT
CODE
SEARCH
CODE
SEARCH
CODE
SEARCH
(BLINK)
(BLINK)
The Sleep Function will turn off your TV automatically after the user
programs the time interval from one (1) to ninety-nine (99) minutes.
Sleep Function
1. Press and hold the
SLEEP
button. The
INDICATOR LIGHT
will stay lit. Release
the
SLEEP
button.
2. Enter time in minutes using the
numerical key pad. Indicator light
will go off.
(Min: 1 minute/keypad entry 0-1)
(Max: 99 minutes/keypad entry 9-9)
3. Leave remote aimed at television.
IMPORTANT:
Sleep Feature will not
work unless remote is left aimed at
television.
ON OFF
INDICATOR
LIGHT
To Turn Off The Sleep Timer:
1. Sleep timer program will be cancelled
and reset to zero by either of the
following:
Press and hold
SLEEP
button until
INDICATOR LIGHT
blinks or press
ON•OFF
button, turning TV OFF.
(BLINK)
…
The Menu Function is used to make changes in the selected settings such
as setting color, channels, timer, etc. The MENU button invokes TV, DVD
and DBS•SAT Modes. Each menu will vary from brand to brand.
Menu Function
Entering the Menu Mode:
1. Push the device button on the remote
for the desired menu screen.
2. Push the Menu button. This allows you
to view the menu of the device chosen.
The menu should now be visible on
your television.
3. While in Menu Mode these buttons will
function as follows:
Navigation Left/Right buttons will
operate as cursor right and left.
Navigation UP/DOWN buttons will
operate as cursor up and down.
MENU
button applies the highlighted
menu item.
SELECT
button may also be used to
select the menu item, especially in
DVD.
Not all functions in competitive models
and brands of televisions may be fully
supported.
EXITING THE MENU MODE
Push the
CLEAR
key to return to
normal operation.
TV
(BLINK)
15
DBS•SAT
DVD
RCU600RS manual 4/11/01 12:15 PM Page 16
