0
Chapter
Using the Remote Control
GUIDE
If programmed, displays the Program Guide when a compatible set-top box (e.g. a digital cable box
or satellite receiver) is connected.
INFO
Displays the Channel Banner with channel and viewing information. Press again to remove the
banner.
INPUT
Toggles through the TV’s available input sources (
INPUT 1, INPUT 2, INPUT 3, INPUT 4, Front Input,
HDMI1, HDMI2, SVGA,
and last-active channel. Note
HDMI2
and
SVGA
might not be available for your TV).
MENU
Makes
Main Menu
appear and disappear.
MUTE
Reduces the TV’s volume to its minimum level. Press again to restore volume. The
Audio Output
menu must be set to
Variable Level, Speakers On
to control the TV’s volume. To program this button to work
with an audio system, follow the instructions for
Volume Punchthrough Feature
on page 23.
OK
When a menu item is highlighted, press OK to select the item.
ON•OFF
Turns the TV on or off. Your HDTV is equipped with a special lamp system. In order to preserve
the life of the lamp, the TV must warm up and cool down properly when you turn the TV on and off. When
you turn the TV off, the screen turns blue and fades to black. While the screen is blue, you can still turn the
TV back on. If the screen is black when you try to turn it on, the TV’s lamp may be in its cool-down cycle.
The TV’s audio comes on, then the picture is displayed after a few moments.
In other modes (SAT•CABLE, VCR, DVD, AUX, AUDIO), and if programmed, turns the device on and off.
PRESETS (only available on remote R602A1)
In TV mode,
toggles through the Picture Presets for the
input you’re currently tuned. In DVD mode, displays the different angles, if available, for the DVD you’re
watching.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed, provides transport control for some
remote-controllable VCRs, DVD players, satellite receivers, etc. The RECORD button has a safety feature which
means you must press the button two times to record.
SAT•CABLE (Satellite•Cable)
Places the remote in SAT/CABLE box mode. If Auto Tuning is enabled, turns
on the TV and tunes it to the satellite or cable box Video Input Channel for RCA devices. This button lights
when you press a valid button in SAT•CABLE mode (see
Modes of Operation
on page 23 for more details).
SKIP (only available on remote R602A1)
Press once before changing channels and the TV returns to the
original channel after 30 seconds. Press repeatedly to add more time. With no menus on-screen, press CLEAR
to cancel.
SOUND (only available on remote R602A1)
In TV mode,
on digital channels/inputs, toggles through the
available Audio Language/ Modes. For analog channels, toggles SAP on or off. If you change channels/inputs,
the default for
Audio Language/ Mode
is restored. Does not affect default menu settings for
SAP
or
Audio
Lang./ Mode
. In DVD mode, displays the different audio options, if available, for the DVD you’re watching.
SUB CH
or
SUBCHANNEL
When entering a digital channel that has a subchannel, press this button to
access the subchannel entry field. Once the channel is entered, press the button to tune to the channel.
TV
Places the remote in TV mode. Turns on the TV and tunes to the last-viewed TV channel or input. This
button lights when you press a valid button in TV mode (see
Modes of Operation
on page 23 for more details).
VCR (only available on remote R602A1)
Places the remote in VCR mode. If Auto Tuning is enabled, turns
on the TV and tunes to the VCR Video Input Channel for RCA devices. This button lights when you press a
valid button in VCR mode (see
Modes of Operation
on page 23 for more details).
VOL – or VOL +
Decreases or increases the TV’s volume. The TV
Audio Output
menu must be set to
Variable Level, Speakers On
to control the TV’s volume. To program this button to work with an audio system,
follow the instructions for
Volume Punchthrough Feature
on page 23.
Содержание Scenium M50WH187
