6
Attach the TV stand or wall mount bracket (not
included)
Attach the TV Stand
CAUTION:
• Be sure to disconnect the AC power cord before installing a stand or wall mount brackets.
• The LED display is very fragile and must be protected at all times when installing the legs that
form the stand. Be sure to protect the TV screen from getting scratched or damaged by any hard
objects. In addition, DO NOT exert pressure on the front of the TV at any time because it could
crack.
To attach the left and right legs that forms the stand:
1.
Carefully place your TV face down on a soft, flat surface to prevent damage to the TV or
scratching to the screen.
2.
Place the legs into the bottom slots of the TV, insert and tighten the screws (found in the
accessories bag) in the circled area with the screwdriver (not provided).
3.
The the TV is ready for use.
NOTE: Be sure to follow the above instructions. Insufficient tightening or incorrect installation
of the stand will not support your TV correctly, and could result in damage or injury from
tip-over.