17
USB Device
An overview
This unit supports MSC devices. You can
connect your own USB storage devices, then
you can start playback.
Connecting/Disconnecting
USB device to the Unit
Insert the USB drive's connector into the
main unit’s USB jack of the unit. To
disconnect, unplug the drive.
USB device playback features
1. Press USB to select USB mode.
2. Playback starts automatically. Press PAUSE
to pause playback and press PLAY again
to resume.
3. Press STOP to end playback.
4. Press CH+/- buttons on the remote control
to skip to the previous or next file.
5. You may also follow the playback
instruction steps 3-7 on playing mp3/WMA
files and jpeg files on P.14.
Note: The unit only support mp3/
WMA/jpeg files on USB device.
Aux-In
TV, VCR or Set Top Box can be connected to AUX
input jacks at the back of the unit so that sound
from the auxiliary component comes into the unit
and out through the speakers.
Connecting auxiliary components
Refer to page 3 “Connecting to external audio
sources (Aux-In)” for details on connecting the
auxiliary components to the unit.
Selecting Aux-In mode
Press either SOURCE on the main unit or
AUX1/2 on the remote control to select AUX1 IN
or AUX2 IN mode.
EN
Sound output in Aux-In mode
• You may change the surround setting by
pressing SURROUND to select between Dolby
ProLogic and Stereo modes.
• If the auxiliary audio signal is mono (e.g. TV
audio), there is no output from surround
speakers in either Dolby ProLogic or Stereo
mode.
• Refer to page 26 for details on Dolby Digital
and Dolby ProLogic.
Содержание RTD317
Страница 35: ......