background image

 

EN-11

 

CD PROGRAM

You can program the CD player to play up to any 20 tracks on the CDs in the tray.
1. While the CD player is stopped, press 

PROGRAM

 to enter program mode. The system displays the next 

available program number: “- - P 01”, prompts you for the fi rst track in the program list.

2. Press 

 / 

 to select a track.

3. Immediately press 

PROGRAM

 to assign the selected track to the  program number. You are prompted for the 

next track in the program list. 

Playing a Program List

While in PROGRAM mode, press 

.

Displaying the Program List

1. While the CD player is stopped, press 

PROGRAM

 to enter PROGRAM mode.

2. Press 

PROGRAM

 repeatedly to list each track assignment in the program list.

RADIO

Press 

SOURCE

 or 

TUNER 

on the remote control to select TUNER.

Tuning to a Station

Press 

 / 

 to select frequencies. Press and hold 

 / 

 to start auto searching for the next available 

station.

Preset and Tune Modes

The tuner can be in either TUNER or PRESET mode. 

Presetting Stations

 

Manually setting presets

1. Press 

 / 

 to access the desired frequency.

2.  Press 

PROGRAM

 button. The most recently accessed program location will be displayed.

3.  If a different program location is preferred, press 

 / 

 to select the desired preset number (1-32) .

4.  Press

 PROGRAM

 to store the selected frequency at that preset.

Auto Preset Programming (FM only)

Press and hold 

AUTO PROG

 for 2 seconds to scan stations in the FM band. The stations will then be stored as 

preset channels. A maximum of 32 stations can be stored.

Beware of your preset channels being erased accidentally because the scanning and storing process is automatic 
upon pressing and holding the button. You can stop the automatic scan by pressing 

TUNE+/TUNE- 

button, but the 

erased stations cannot be recovered.

Using Presets

Press   

PRESET 

 to access the previous or next preset station. The display fi rst shows the preset program 

number and after a few seconds, the frequency will be displayed. (e.g. P:01 is preset 1)

Suppressing Stereo Signal

Press 

FM ST.

 to select between ST ON and ST OFF for stereo FM stations.

Содержание RS2867B















Отзывы: